◾ Liquid particle monitoring system utilizing aerosol metrology and data processing algorithm: chemical mechanical polishing slurry application, MEASUREMENT, vol.259, 2026곽동빈

◾ Nanoparticle penetration efficiency prediction model in conductive and non-conductive coils for aerosol measurement system: Experimental research and critical review, ADVANCED POWDER TECHNOLOGY, vol.36 No.10, 2025곽동빈

◾ Linking structure and filtration performance in electrospun polyethersulfone filters: The role of deposition uniformity and configuration, BUILDING AND ENVIRONMENT, vol.284, 2025곽동빈

◾ Multi-objective optimization of a cylindrical heat sink with straight and forked fins using artificial neural network (ANN), INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.165, 2025곽동빈

◾ Optimal operating positions of two air purifiers for improving indoor air quality in hospital wards, JOURNAL OF HOSPITAL INFECTION, vol.159 pp.42~51, 2025곽동빈

◾ Impact of high-altitude conditions and low ambient pressure on saliva evaporation rate and airborne transmission of viruses, BUILDING AND ENVIRONMENT, vol.269, 2025곽동빈

◾ Semi-empirical equation for determining the pressure drop of nanofibers, SEPARATION AND PURIFICATION TECHNOLOGY, vol.324, 2023곽동빈

◾ Development of drone-based filter sampling system for carbonaceous aerosol analysis using thermal-optical transmittance method, AEROSOL SCIENCE AND TECHNOLOGY, vol.57 No.9 pp.861~871, 2023곽동빈

◾ Development of a two-column particle sizer (TC-PS) for simultaneous measurements of particle concentration and size distribution, AEROSOL SCIENCE AND TECHNOLOGY, vol.57 No.9 pp.903~910, 2023곽동빈

◾ Comparison of microfiltration performances of ePTFE and PCTE membranes in IPA and deionized water, JOURNAL OF WATER PROCESS ENGINEERING, vol.54, 2023곽동빈

◾ Development of a detection system for gas-phase aromatics and other molecules ionizable by soft X-rays demonstrated using methyl salicylate, AEROSOL SCIENCE AND TECHNOLOGY, vol.57 No.7 pp.619~632, 2023곽동빈

◾ Modeling pressure drop values across ultra-thin nanofiber filters with various ranges of filtration parameters under an aerodynamic slip effect, SCIENTIFIC REPORTS, vol.13 No.1, 2023곽동빈

◾ Accurate measurements of particle emissions from a three-dimensional printer using a chamber test with a mixer-installed sampling system, SCIENTIFIC REPORTS, vol.13 No.1, 2023곽동빈

◾ Saliva Droplet Evaporation Experiment and Simple Correlation of Evaporation-falling Curve under Different Temperatures and RH, AEROSOL AND AIR QUALITY RESEARCH, vol.23 No.3, 2023곽동빈

◾ Numerical study of nanoparticle penetration characteristics in forked tubes using tracking particle identification, POWDER TECHNOLOGY, vol.415, 2023곽동빈

◾ Detection of Airborne Nanoparticles through Enhanced Light Scattering Images, SENSORS, vol.22 No.5, 2022곽동빈

◾ Study on Droplet Dispersion Influenced by Ventilation and Source Configuration in Classroom Settings Using Low-cost Sensor Network, AEROSOL AND AIR QUALITY RESEARCH, vol.21 No.12, 2021곽동빈

◾ Quantitative analysis of droplet deposition produced by an electrostatic sprayer on a classroom table by using fluorescent tracer, BUILDING AND ENVIRONMENT, vol.205, 2021곽동빈

◾ Application of an Electrical Low Pressure Impactor (ELPI) for Residual Particle Measurement in an Epitaxial Growth Reactor, APPLIED SCIENCES-BASEL, vol.11 No.16, 2021곽동빈

◾ Characterization of handheld disinfectant sprayers for effective surface decontamination to mitigate severe acute respiratory coronavirus virus 2 (SARS-CoV-2) transmission, INFECTION CONTROL & HOSPITAL EPIDEMIOLOGY, vol.42 No.7 pp.901~903, 2021곽동빈

◾ Numerical investigation of nanoparticle deposition location and pattern on a sharp-bent tube wall, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.164, 2021곽동빈

◾ Experimental study of nanoparticle transport and penetration efficiency on a sharp-bent tube (elbow connection), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.155, 2020곽동빈

◾ Nanofiber Filter Performance Improvement: Nanofiber Layer Uniformity and Branched Nanofiber, AEROSOL AND AIR QUALITY RESEARCH, vol.20 No.1 pp.80~88, 2020곽동빈

◾ Characterization of colloidal nanoparticles in mixtures with polydisperse and multimodal size distributions using a particle tracking analysis and electrospray-scanning mobility particle sizer, POWDER TECHNOLOGY, vol.355 pp.18~25, 2019곽동빈

◾ Influence of colloidal particles with bimodal size distributions on retention and pressure drop in ultrafiltration membranes, SEPARATION AND PURIFICATION TECHNOLOGY, vol.222 pp.352~360, 2019곽동빈

◾ Effects of wall thickness and material property on inverse heat conduction analysis of a hollow cylindrical tube, INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, vol.26 No.9 pp.1305~1325, 2018곽동빈

◾ Natural convection flow around heated disk in cubical enclosure, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.32 No.5 pp.2377~2384, 2018곽동빈

◾ Optimization of the radial heat sink with a concentric cylinder and triangular fins installed on a circular base, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.32 No.1 pp.505~512, 2018곽동빈

◾ Inverse heat conduction modeling to predict heat flux in a hollow cylindrical tube having irregular cross-sections, APPLIED THERMAL ENGINEERING, vol.128 pp.1310~1321, 2018곽동빈

◾ Cooling performance of a radial heat sink with triangular fins on a circular base at various installation angles, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol.120 pp.377~385, 2017곽동빈

◾ 조성민, 곽동빈, Evaluation of CMP Slurry Hydrosol Size Distributions via Aerosol Metrology and ML Algorithm with NVR Subtraction, 2025 KSMPE Autumn Conference, 제주 그랜드하얏트호텔, 2025곽동빈

◾ 이유선, 곽동빈, Analysis of Humidity Dependent Pressure Drop and Performance Changes in Respiratory Mask with and without Electrostatic Charge Effect, 2025 KSMPE Autumn Conference, 제주 그랜드하얏트호텔, 2025곽동빈

◾ 곽승재, 조성민, 곽동빈, Development of a Delivery Algorithm for Estimating Particle Size Distribution and Pulmonary Deposition Fraction of Conventional and Electronic Cigarettes Based on Aerosolization Mechanisms., Proceedings Korean Association for Particle and Aerosol Research, 용평 리조트, 2025곽동빈

◾ 김정섭, 곽승재, 권형규, 이종현, 조용재, 조성민, 이유선, 곽동빈, Predictive model of nanoparticle penetration efficiency through conductive and non-conductive coils in aerosol measurement systems: experimental study and critical review, Proceedings Korean Association for Particle and Aerosol Research, 용평리조트, 2025곽동빈

◾ 조용재, 강재원, 조성민, 이유선, 조민철, 노정훈, 이현기, 곽동빈, Nanoparticle size distribution and real-time monitoring system in CMP slurry, 2025 KSMPE Spring Conference, 여수 소노캄호텔, 2025곽동빈

◾ 최승혁, 최중명, 이승우, 곽동빈, Multi-objective optimization of cylindrical heat sinks with straight and forked fins using artificial neural networks, 2025 KSMPE Spring Conference, 여수 소노캄호텔, 2025곽동빈

◾ 이유선, 조성민, 김정섭, 곽동빈, Analysis of Particle Loading and Pressure Drop Characteristics of Respiratory Mask Filters according to Varying Humidity Conditions, 2025 KSMPE Spring Conference, 여수 소노캄호텔, 2025곽동빈

◾ 이유선, 곽동빈, Analysis of initial filtration efficiency and pressure drop of respiratory masks according to different discharging methods, 2025 THE KOREAN SOCIETY OF CLEAN TECHNOLOGY SPRING CONFERENCE, 부산 BEXCO 제2전시장, 2025곽동빈

◾ 곽동빈, Development of nanofiber air filtration pressure drop equation, Proceedings of the KSMPE Autumn Conference 2024, 제주시 그랜드하얏트호텔, 2024곽동빈

◾ 곽동빈, Development of a semi-empirical equation to determine the pressuredrop of nanofibers, 2024 The Korean Society of Clean Technology Fall Conference, 경주화백컨벤션센터, 2024곽동빈

◾ 조성민, 진혜인, 곽동빈, Wearing and Saliva Impact on Facial Respirator, 2024 Korean Society of Particle and Aerosol Research Conference, 용평리조트, 2024곽동빈

◾ 곽동빈, Development of a semi-empirical equation for pressure drop in nanofibers, 2024 Korean Society of Particle and Aerosol Research Conference, 용평리조트, 2024곽동빈

◾ 1단계 - 온도 및 습도 제어를 통한 환경변수에 따른 공기여과 효율 분석, Center for Filtration Research, 2024.10.~2025.06.곽동빈

◾ 1단계: 반도체 결함의 원인인 대입자(500nm 이상)를 측정하기 위한 CMP슬러리 입자평가 분석방법 개발, Center for Filtration Research, 2024.10.~2025.06.곽동빈

◾ SMPS를 이용한 CMP slurry 분석기법개발, 삼성전자(주), 2024.10.~2025.06.곽동빈

◾ PSL 표준 입자를 이용한 Aerosol Generator와 Classifier and Counter의 CMP Defect 유발요소 계측설비 적용에 대한 신뢰성 및 타당성 연구, 삼성전자(주), 2024.09.~2025.02.곽동빈

◾ 호흡기 착용으로 인한 여과 성능에 미치는 영향, 서울과학기술대학교, 2024.07.~2024.12.곽동빈

◾ 동적 온도구배 변화에 따른 포열 거동 모델링 및 온도 특성 해석, 고등기술연구원연구조합, 2024.04.~2024.05.곽동빈

◾ Quantification of CMP slurry particle size distribution using aerosol measurement-based liquid particle monitoring and machine learning algorithms., Excellence Award, The Korean Society of Manufacturing Process Engineers, 2025곽동빈

◾ A Prediction Model for Nanoparticle Penetration Efficiency in Conductive and Nonconductive Coils for Aerosol Measurement Systems: Experimental Studies and Critical Review, Excellent Poster Presentation Award, Korean Association for Particle and Aerosol Research, 2025곽동빈

◾ Multi-objective optimization of cylindrical heat sinks with straight and forked fins using artificial neural networks, Excellence Award, The Korean Society of Manufacturing Process Engineers, 2025곽동빈

◾ Analysis of particle loading and differential pressure characteristics of respiratory mask filters according to humidity changes, Excellence Award, The Korean Society of Manufacturing Process Engineers, 2025곽동빈

◾ Development of Nanofiber Air Filtration Pressure Drop Equation, Young Engineer Award, The Korean Society of Manufacturing Process Engineers, 2024곽동빈